Kart Specifications
Fiberglass
 
Super Stock Racer (Naskart), GTP Racer, Super Stock Truck
   
Lenght: 96 inches
Width: 48 inches
Height: 38 inches
Weight: 620 lb
 
Body:

Fiberglass top shell. The fiberglass body rest on the urethane shock absorbers.
 
Frame: 1 1/2" x 2" x .120 rectangular steel tubing. All MIG welded. Urethane shock absorbers are mounted to the frame.
 
Bumper: 4" spring steel bumper mounted to the urethane shock absorbers.
 
Engine: Honda air cooled engines with centrifugal wet clutch. Available engines are
5.5hp GX160K1, 6.5hp GX200K1, 8hp GX240K1, 9hp GX270 K1
 
Drive belt: Gates Poly Chain GT
 
Brake type: Heavy duty band brake. Our steel band brake has a truck brake lining rivetted to the steel band. Low maintenance
 
Linkages: Gas and brake rods, solid steel rods with metal linkages.
Steering; 3/4" tie rods, 1/2" tie rod ends.
 
Rear axle: 1" live axle (both tires drive) with tapered ends (no keyways to wear out). Our axles are made of the same chrome alloy used for hydralic rams.
 
Rear hub: Rear hubs are made from solid aluminum stock. CNC machined with taper for press fit onto axle. Wheel studs for quick tire changes.
 
Front spindle: 1" steel spindle and needle bearing caps.
 
Front hub: Front hubs are machined from solid aluminum stock. CNC machined for tapered roller bearings or sealed ball bearing. Wheel studs for quick tire change.
 
Tires: 6" go-kart slicks with tube.
 
Rims: 6" spun amluminum.
 
Options
 
Rack and pinion steering: Power steering for go-karts. Great for aspault tracks. Great for tracks with alot of turns. It helps absorb the shock from rough tracks. Improves the performance of the kart on any type of track.
Differential axle: The differnetial drives the inside tire when the kart turns. The kart turns equally well left or right.
Split axle: Drives only one wheel. RE karts are set up to drive the right tire. A double brake is required.
2 gallon gas tank
   
   
 

 


Kart Specifications
Hybrid (plastic base body / fiberglass top)
Super Stock Racer (Naskart), GTP Racer, Ferrari, Super Stock Truck
Lenght: 96 inches
Width: 49 inches
Height: 40 inches
Weight: 540 lb
Body:

Special high-imapact cross-link plastic body for the base. Fiberglass top shell.
(click here for details on the hybrid body system)
Frame: 1 1/2" x 2" x .120 rectangular steel tubing. All MIG welded. Urethane shock absorbers are mounted to the frame. The Plastic body rest on the urethane shock absorbers.
Bumper: 4" spring steel bumper mounted to the plastic body. Rubber shock absorbers are mounted between the front bumper and body for additional shock absorption.
Engine: Honda air cooled engines with centrifugal wet clutch. Available engines are
5.5hp GX160K1, 6.5hp GX200K1, 8hp GX240K1, 9hp GX270 K1
Drive belt: Gates Poly Chain GT
Brake type: Heavy duty band brake. Our steel band brake has a truck brake lining rivetted to the steel band. Low maintenance
Linkages: Gas and brake rods, solid steel rods with metal linkages.
Steering; 3/4" tie rods, 1/2" tie rod ends.
Rear axle: 1" live axle (both tires drive) with tapered ends (no keyways to wear out). Our axles are made of the same chrome alloy used for hydralic rams.
Rear hub: Rear hubs are made from solid aluminum stock. CNC machined with taper for press fit onto axle. Wheel studs for quick tire changes.
Front spindle: 1" steel spindle and needle bearing caps.
Front hub: Front hubs are machined from solid aluminum stock. CNC machined for tapered roller bearings or sealed ball bearing. Wheel studs for quick tire change.
Tires: 6" go-kart slicks with tube.
Rims: 6" spun amluminum.
Options
Rack and pinion steering: Power steering for go-karts. Great for aspault tracks. Great for tracks with alot of turns. It helps absorb the shock from rough tracks. Improves the performance of the kart on any type of track.
Differential axle: The differnetial drives the inside tire when the kart turns. The kart turns equally well left or right.
Split axle: Drives only one wheel. RE karts are set up to drive the right tire. A double brake is required.
2 gallon gas tank